Ets Intarlaken Technologies Kolkata, West Bengal

Send SMS
Contact Us

Computerized Universal Testing Machines

Computerized Universal Testing Machine

Computerized Universal Testing Machine

Approx. Rs 3.4 Lakh / 

Model-III: Computerized Universal Testing Machine, Servo Controlled.

Properties:-
'ets' Computerized Universal Testing Machine(Servo-controlled) The Universal Testing Machine shall be able to perform the following tests for a wide variety of materials and components:-
  • Tensile
  • Compression
  • Shear
  • Flexural
  • Low Cyclic Test


The system includes:
  • Loading unit
  • Measure and Control unit
  • Operation unit
  • Testing Jig
  • High precision loading cell
  • Extensometers(Optional)
  • Transformer (Optional)
  • Software
  • Data processing software for tensile and compression test compatible with Windows Operating System.
  • Data Processing Unit



Technical Specification:
1)Loading Unit
  • wo column loading frame and of floor type
  • Loading method by high resolution digital AC servo motor
  • The capacity : 10 to 10,000 KGF/ KN equivalent.(tension and compression mode)
  • The effective test width : 400 mm or more
  • The crosshead clearance : 1000 mm or more
  • Maximum speed : upto 500 mm/min or more


2) Measure And Control Unit
  • The crosshead speed range from 0.001 to 1000 mm/min with accuracy of ±0.1%.
  • The crosshead return speed 500 mm/min or more and shall have auto-return function.
  • The crosshead stroke measurement shall be by means of optical encoder.
  • The crosshead stroke display resolution should be at least 0.001 mm
  • The crosshead control shall consist of single test control, cycle test control and manual test control

3) Operation Unit
The operation unit must come with Desktop PC or LCD touch-screen(optional) for
efficient system control and test results display.
The operation unit shall have the following function: -
  • Test Force Calibration Function
  • Break Detection Function
  • Automatic Read Function For Load Cell Characteristic Value
  • Peak/Break Value Display Function
  • Cycle Figure Display Function
  • Test Condition File Function, minimum 15 files.
  • Real Time S-S Curve Display.

4) Testing Jig
Tensile Test Device
The following devices shall be supplied to perform tensile test:
  • Wedge type grips Flat and Round specimens.
  • Compression Test device

The following devices shall be supplied to perform compression test:
  • A pair of fixed type 100 mm diameter compression plate

5) Load Cell
The load cell supplied shall have the accuracy of 1.0% of indicated load

6) Extensometer(Optional)
The extensometer shall give more accurate measurement of elongation Strain gauge/LVDT type one touch extensometer gauge length 50 mm.

7) Software
The software shall have the following features:
  • The software shall support latest window based operating system.

Digital Universal Testing Machine

Digital Universal Testing Machine

Approx. Rs 4 Lakh / Piece(s)

Properties of Digital Universal Testing Machine :
• Loading Accuracy as high as + 1%
• Straining at variable speeds to suit a wide range of materials.
• Printer may be supplied to enable study the behavior of the material (Optional)
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen (Optional)
• Simplicity in reading because of digital readouts.
• Wide range of standard and special accessories, including load stabilizer which are optional.
• Easy change/fixing of specimens.
• Large effective clearance between columns enables testing of standards specimens as well as structures.
• Simple controls for easy of operation.
• Robust staining frame of an extremely rigid construction.
• Safe operation ensured be means of safety devices.
• Fully enclosed hydraulic power pack.
• Optional serial port to transfer data.

Application :
Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse, brinelland shear loads. Brinell Hardness test on metals can also be conducted using optional test attachments.

Principal of Operation :
Operation of the machines is by transfer of electronic signals of load from the test specimen through pressure transducer to a separately housed load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit corresponding the load exerted by the main ram. Simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously.The displacement may be read from a linear scale fitted in the loading unit at a reduced price.

Straining Unit
This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two strengthened columns. The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram of any possible side loading by the provision of seatings. Manual adjustment of cross-head may be provided at a reduced price.

Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.

The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of
fixing of the test specimen.

Control Panel :
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves and electronic
display unit.

Power Pack :
2 The power pack generates a pressure of upto 600 kgf/cm the hydraulic pump provides continuously non-pulsating
oil flow. Hence the load application is very smooth.

Digital Universal Testing Machine

Digital Universal Testing Machine

Approx. Rs 1.2 Lakh / each

Model-v: Digital Universal Testing Machine, Electro Mechanical
Properties:-

This tester was ergonomically designed to provide a compact, low-cost, functional unit which is quick and easy to operate. It gives extremely high accuracy and yet is robust enough for routine quality control testing. The single and twin column designs permit all-round access to the specimen and grips.

ETS Universal Tester, screw type, motor driven and is suitable for conducting tensile strength & elongation,compression, bend, shear tests on various materials such as metal rubber, plastic, leather, asbestos, PVC, paper, textile, Wire/Cable, plywood/wood, ceramics, rexins etc. in conformity with standards like ISS, BSS, ASTM, DIN or ISO.

We are exporting a wide range of testing machine, electro mechanical testing machine, electric testing machine, universal mechanical testing machine and more.

The basic frame allows a total jaw separation of 1000 mm. However, extended frame having jaw separation upto 2000 mm may be supplied at additional cost.

The machine is operated on 230 volts. 1-ph, 50 c/s. A. C. Mains or as desired. A comprehensive range of grips, attachments/fixtures, cutting dies are available to suit the testing needs of many different industries.



Specifications:
LOAD FRAME
• Capacity: 50 to 10000 Kgf or equivalent KN
• Type aviable : Bench top, single or dual screw
• Testing Area: Tension and Compression above moving cross-head
• Horizontal Clearance: 12 inches (300mm) to 16inches (400mm)
• Vertical Clearance: 36 in. (914mm) STANDARD, excluding grips or fixtures
• Cross-head Travel: 24 in. (610mm) STANDARD or greater
• Limit Switches : adjustable
• Cross-head Guidance independent chrome plated guide rods
• Upper Cross-head adjustable CROSSHEAD CONTROLS
• Speed Range: 5/50mm/mim OPTIONAL
• 5/500 mm/min OPTIONAL
• Cross-head Speed Selection: 0.1% increments of speed range
• Speed Accuracy: +/- 1%
• Digital Speed Display: English or Metric units
• LOAD MEASURING
• Load Weighing Accuracy: +/- 0.1% of indicated load +/- 0.1% of range in use
• Ranges: 10%, 20%, 50%, 100% of load cell in use
• Automatic Overload Protection: STANDARD
• Peak Load Recall: STANDARD
• Digital Display: STANDARD - English or Metric units
• Up to five load cells can be used
• Automatic break detect: STANDARD


REQUIREMENTS
• Power requirements: 120 or 240 VAC, 1 phase, 50/60 Hz as desired.
• Displacement Measuring system and zero return (Optional)
• High Precision Optical incremental encoder
• Range full cross-head travel
• Display : Digital
• Resolution: 0.01mm)
• Zero return push-button actuated return to zero position

ACCESSORIES:
• A wide variety of options is available for use with these systems, including chambers, extensometers, grips, recorders, etc.

Digital Universal Testing Machine - Electro Hydraulic

Digital Universal Testing Machine - Electro Hydraulic

Approx. Rs 5 Lakh / Unit(s)

PROPERTIES:-
  • Loading Accuracy as high as + 1%
  • Straining at variable speeds to suit a wide range of materials.
  • Printer may be supplied to enable study the behavior of the material (Optional)
  • Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen (Optional)
  • Simplicity in reading because of digital readouts.
  • Wide range of standard and special accessories, including load stabilizer which are optional.
  • Easy change/fixing of specimens.
  • Large effective clearance between columns enables testing of standards specimens as well as structures.
  • Simple controls for easy of operation.
  • Robust staining frame of an extremely rigid construction.
  • Safe operation ensured be means of safety devices.
  • Fully enclosed hydraulic power pack.
  • Optional serial port to transfer data.

Applicat ion :
Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse, brinelland shear loads. Brinell Hardness test on metals can also be conducted using optional test attachments.

Principal of Operation :
Operation of the machines is by transfer of electronic signals of load from the test specimen through pressure transducer to a separately housed load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. 

Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit corresponding the load exerted by the main ram. Simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously.The displacement may be read from a linear scale fitted in the loading unit at a reduced price.

Straining Unit
This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two strengthened columns. The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram of any possible side loading by the provision of seatings. Manual adjustment of cross-head may be provided at a reduced price.

Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.

The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of
fixing of the test specimen.

Control Panel :
The control Panel consists of a power pack complete with drive motor and an oil tank, control valves and electronic display unit.

Power Pack :
The power pack generates a pressure of upto 600 kgf/cm the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.

Computerized Universal Testing Machines - Electro Hydraulic

Computerized Universal Testing Machines - Electro Hydraulic

Approx. Rs 5 Lakh / unit

PROPERTIES:-
You can choose from the various materials you want to test including metal samples, concrete, rebar, tube & pipe, stranded wire, steel bar & plate, fasteners, wood and high strength composites, spring, Refra-ctory, etc. You can choose from the various tests you want to conduct including Tensile, Compression, Bend/Flexure, Brinell Hardness, Shear,Exten-sometry, etc. Get on-line readings of the test, save them and print them. We are offering hydraulic testing machine, electro hydraulic testing machine, hydraulic universal testing machine and more.

Computerized Universal Testing Machine
This machine is designed specially for determining tensile, compression, elongation, fold-resisting, bending, adhesive, extension, flaking, shearing and other strengths using appropriate test attachments which are optional.
Functions of yield point, elasticity modulus, Young's modulus, puncture, etc. Are also available as additional options.

Specifications:
  • Structure and Base: made of steel plates and hardened surface treatment where needed. High strength, resistance of shakes.
  • Capacity: Available from 5 to 300 Ton. ( 50 to 3000KN)
    Min Resolution: 1/10000.
  • Accuracy: ±1%.
  • Driving Method: Hydraulic System.
  • Ram Stroke(mm): from 100 to 250 depending upon machine capacity.
  • Effective Column Interval (mm): 300 to 750 depending upon machine capacity.
  • Crosshead Speed(mm/min): from 50 to 100 depending upon machine capacity.
  • Testing Speed(mm/min): from 50 to 250 depending upon machine capacity.


Transverse & Bending.
Above three specifications shall depend upon machine capacity. With one set of testing program software.

Control unit:
  • Setting range: 1~50mm/min.
  • Constant speed load control: 5~100% of full scale load
  • Constant speed strain control Range: 5~100% of full scale strain.
  • Emergency shut down button & over load protection function equipped.
  • Display of testing parameters: value and real-time curve (load, stroke or elongation).



COMPUTER SYSTEM (WINDOWS SOFTWARE) CPU: Intel Pentium 4 CELERON 1.7 GHZ above. , RAM: 256MB, Standard 1.44MB FDD*1, HARD DISK DRIVE 20 GB,Above 52 X high speed CD-ROM, CRTCOLOUR MONITOR 15", Deskjet Printer.(Table for PC not included).

Computerized Universal Testing Machines - Servo Controlled

Computerized Universal Testing Machines - Servo Controlled

Approx. Rs 5 Lakh / Unit(s)

PROPERTIES:- 
'ETS' COMPUTERIZED UNIVERSAL TESTING MACHINE(SERVO-CONTROLLED) The Universal Testing Machine shall be able to perform the following tests for a wide variety of materials and components:-
  • Tensile
  • Compression
  • Shear
  • Flexural
  • Low Cyclic Test


The system includes:
  • Loading unit
  • Measure and Control unit
  • Operation unit
  • Testing Jig
  • High precision loading cell
  • Extensometers(Optional)
  • Transformer (Optional)
  • Software
  • Data processing software for tensile and compression test compatible with Windows Operating System.
  • Data Processing Unit


Technical Specification:
1)Loading Unit
  • wo column loading frame and of floor type
  • Loading method by high resolution digital AC servo motor
  • The capacity : 10 to 10,000 KGF/ KN equivalent.(tension and compression mode)
  • The effective test width : 400 mm or more
  • The crosshead clearance : 1000 mm or more
  • Maximum speed : upto 500 mm/min or more


2) Measure And Control Unit
  • The crosshead speed range from 0.001 to 1000 mm/min with accuracy of ±0.1%.
  • The crosshead return speed 500 mm/min or more and shall have auto-return function.
  • The crosshead stroke measurement shall be by means of optical encoder.
  • The crosshead stroke display resolution should be at least 0.001 mm
  • The crosshead control shall consist of single test control, cycle test control and manual test control

3) Operation Unit
The operation unit must come with Desktop PC or LCD touch-screen(optional) for
efficient system control and test results display.
The operation unit shall have the following function: -
  • Test Force Calibration Function
  • Break Detection Function
  • Automatic Read Function For Load Cell Characteristic Value
  • Peak/Break Value Display Function
  • Cycle Figure Display Function
  • Test Condition File Function, minimum 15 files.
  • Real Time S-S Curve Display.

4) Testing Jig
Tensile Test Device
The following devices shall be supplied to perform tensile test:
  • Wedge type grips Flat and Round specimens.
  • Compression Test device

The following devices shall be supplied to perform compression test:
  • A pair of fixed type 100 mm diameter compression plate

5) Load Cell
The load cell supplied shall have the accuracy of 1.0% of indicated load

6) Extensometer(Optional)
The extensometer shall give more accurate measurement of elongation Strain gauge/LVDT type one touch extensometer gauge length 50 mm.

7) Software
The software shall have the following features:
  • The software shall support latest window based operating system.

The software shall comprise with the following test:-
  • Tension
  • Compression
  • Three-point Bending
  • Four-point Bending
  • Peel
  • Friction
  • The software shall have real time curve plot.
  • The software shall have data analysis mode.


Computerized Universal Testing Machines - Electro Mechanical

Computerized Universal Testing Machines - Electro Mechanical

Approx. Rs 3 Lakh / Unit(s)

The ETS Computerized Universal Tensile Tester is the cumulation of years of experience by one of the world’s leading manufacturers of materials testing machines, tensile testing machine and mechanical testing machine. This new tester is designed for a wide range of applications including: bending, compression, tensile testing and peeling using appropriate test attachments which are optional.

The tester offers excellent accuracy and ease of use. It is strong and durable enough to withstand many years of use, yet it has a compact load frame that provides greater flexibility of placement.

Whether you choose the basic unit or add the optional advanced software package, the tester sets the standard in Universal Tensile Testing.

The load cell used in this tester offer one-touch zero adjustment and load cell capacity discrimination guarantees accuracy and speeds the setup process.

This is particularly important when multiple tests are being performed.

Software Package:
The tester offers a host of software features that allows programming of all parameters, operational control and real-time display of the on-going test. This software package allows the operator to conduct a wide range of tests with an almost limitless array of test parameters and displayed test information when used with a PC.
Features :
  • Strong load frame
  • Displays all operational data - The Control Panel displays all Crosshead traveling Values in relation to actual load value vs elongation.
  • Memory function - Test data may be displayed, stored in memory for future reference or printed for reports, certification and presentations.
  • Simple operation - Test parameters are easily set through simple key & point & click Entry with the mouse.
Specifications :
  • Max. capacity - available from 10 Kgf to 10,000 Kgf.
  • Test Width (mm) approx. - 500mm
  • Crosshead Travel (mm) approx. - 1000mm
  • Effective Stroke (mm) approx. - 1000mm
  • Crosshead Speed (mm/min) - upto to 500 mm/min
  • Crosshead Return Speed - upto 500mm/min
  • Tensile Load Measurement Accuracy - +/- 1%
  • Stroke Limiter upper/lower - 2 points
  • Power : 220-240 Volts, 1-phase,
  • Test parameters displayed with graph simultaneously
  • Real time graphic display of data
  • Overlay display of data curve possible during test
  • Selectable graphical display presentation
  • Other test methods can be programmed by the operator
  • Return after a test is selected
Computer Hardware :
  • The latest computer hardware including an Ink Jet Printer and a 15” Colour Monitor.
Test Categories :
The following are a list of test categories that can be performed on the tester:
  • Tensile
  • Tearing
  • Creep
  • Compression
  • Adhesion
  • Humid environmental
  • Bending
  • Sticking
  • High-low temperature
  • Pull-out
  • Environmental
  • Peeling
  • Stress-relaxation

The above tests can be performed using appropriate optional test attachments.
If there is something, which is not listed, please contact us to discuss your requirements.
We can tailor make machines and programs to our customer’s requirements.

Computerized Universal Testing Machines

Approx. Rs 5 Lakh / Unit(s)

We manufacture computerized universal testing machines for all industries. These machines are highly result oriented and long lasting. The wide variety includes computerized universal testing machines (electro mechanical), computerized universal testing machines (servo controlled) and computerized universal testing machines (electro hydraulic).

Computerized Universal Testing Machines

Approx. Rs 3.2 Lakh / each

We manufacture computerized universal testing machines for all industries. These machines are highly result oriented and long lasting. The wide variety includes computerized universal testing machines (electro mechanical), computerized universal testing machines (servo controlled) and computerized universal testing machines (electro hydraulic).

Universal Testing Machines (UTM)

Approx. Rs 2.2 Lakh / 

A Universal Testing Machine also known as a materials testing machine and can be used to test the tensile and compressive properties of materials. This type of machines are called Universal Testing Machine because it can perform all the tests like compression, bending, tension etc to examine the material in all mechanical properties. These machines generally have two columns but single column types are also available. Load cells and extensometers measure the key parameters of force and deformation which can also be presented in graphical mode in case of computer operated machines.. These machines are widely used and would be found in almost all materials testing laboratory.

UNIVERSAL TESTING MACHINES can be of different types based output required like Computer operated Universal Testing Machine and Digitally operated Universal Testing Machine

Universal Testing Machines can be further classified to Electro-mechanical type and Electro-hydraulic.

Universal Testing Machines are also be categorized based on the number of column used in the machine, like:
1. Single Column Universal Testing Machines
2. Double / Dual Column Universal Testing Machines
3. Four Column Universal Testing Machines

ETS offer all such type Universal Testing Machines which are used to conduct various tests on a multitude of materials like metal, rubber, plastic, leather, asbestos, PVC, paper, textile, wire, plywood, ceramics, resins etc.

ETS has manufactured Universal Test Machine for critical uses.

For Example ETS has manufactured and exported Universal Testing Machine for the purpose of testing Human Teeth. This Universal Testing Machine is presently is in use in Europe.

ETS Universal Testing Machines also are in use in Indian Army and Atomic Research Centers.

ETS request you just to send your requirement and our technical team will get in touch to give you the best possible solution of Universal Testing Machines.
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Computerized Universal Testing Machines ?

    country-ico

    We will contact you soon !

    T. K. K. Basu

    (CEO)

    Ets Intarlaken Technologies

    Baranagar, Kolkata, West Bengal, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us